Drum gear coupling disassembly method

Drum gear coupling this part is not unfamiliar to all of us, but I also believe that you will not know much about the use and installation, in the installation process, first in the flange of the other part of the screw hole into the three bolts along the circumference of the uniform cloth, the inner sleeve, the jacket top open, the following is a small edition for you to introduce in detail.

Drum gear coupling disassembly correct method:

One is installation: expansion sleeve in the factory has been coated with lubricating oil, can be directly installed and used. When installing, screw three bolts into the screw hole of the flange of the other part along the circumference of the uniform cloth, and open the inner sleeve and jacket. Then the expansion sleeve into the design position of the hub hole, the use of force plate hand tightening bolts, tightening method is each bolt each time only to the rated torque 1/4, tightening order to open the seam as the boundary, left and right cross symmetric tightening successively, to ensure that the rated torque value.

The second is disassembly: disassembly all the bolts will be relaxed a few rings. Then screw the bolt top expansion sleeve in the removed screw hole.

Three is protection: installation to prevent expansion sleeve pollution, strictly prohibit the use of MoS2 oil. In the open air operation or the machine with poor working environment, anti-rust grease should be applied regularly on the exposed expansion sleeve end face and bolts, and the expansion sleeve type with better anti-rust should be selected.

The above is for you to analyze and explain the drum gear coupling disassembly method, hope to bring you the following help, if you do not understand or have some other suggestions, I hope you communicate with our factory as soon as possible, we want to bring some beneficial help for every customer.