JM single diaphragm coupling installation principle

JM type single diaphragm coupling is a kind of coupling parts used more in mechanical design diaphragm coupling, but we want to use the coupling, then we need to understand its installation principle before use, in order to extend the service life of JM type single diaphragm coupling. Let's follow Xiaobian to understand it!

JM type single diaphragm coupling installation principle:
1. Bolt is an important core component of diaphragm coupling, its installation is correct or not directly affects the performance life and usability of the product, otherwise it will cause a lot of manpower and spare parts waste. Therefore, the correct installation of bolt direction is a key link, and do not remember to install and drop a small part including the spring washer, in order to make the bolt assembly play its excellent performance, will not make other parts damaged.
2. Clearance between bolt fitting section and flange hole fitting section. Generally, according to bolt diameter of 0.20mm ~ 0.30mm, this fitting section plays a key role in transferring torque. The diameter gap between the inner hole and the bolt between the buffer sleeve and the diaphragm rivet is 0.5mm ~ 0.7mm, which plays the role of pressing and positioning the diaphragm. If the direction of the bolt Kai easy to cause the bolt skew, and the diaphragm will therefore distort deformation.
3. Correct bolt installation method: The bolt is pierced from the outer side of the flange hole, and then into the diaphragm hole (pay attention to the direction of the diaphragm, the diaphragm is made up of many single sheets by rivet and rivet washer, the rivet washer should be in contact with the buffer sleeve, otherwise it will affect the service life of the rivet group), and then from the other flange hole outside the buffer sleeve, elastic washer, When fastening the nut, pay attention to ensure that the bolt does not rotate. When installing the bolt, pay attention to the direction of the bolt. Do not install the direction of the bolt at will, otherwise, the diaphragm will be distorted. Because the surface of bolt and flange mating section is a very important mating section for transferring torque, the surface integrity directly affects the service performance.

The above content is about the JM type single diaphragm coupling installation principle of the relevant knowledge, I hope to help the old and new customers, my factory is a production of JM type single diaphragm coupling of the old manufacturers, self-produced self-marketing products affordable, short period, excellent quality, need friends welcome to consult and order!